Matt Look Decking Oil

Our Matt Look Decking Oil (previously known as Feast Watson Decking Oil) will provide the most natural looking finish to your timber.

Bring your deck to life with a natural, low sheen finish with an easy to use water wash-up, low odour and fast drying product. Our exterior decking oil provides a simple, understated and beautiful finish to your outdoor area.

Choose from any of our sophisticated colours and match the perfect hue to your space. With an abundance of warm and natural colours, the Natural, Jarrah and Merbau colour palette offer an elegant transformationt to your outdoor space.

You can walk out to a luxurious and stunning deck every day with the Matt Look Decking Oil.

Safety Data Sheet

Find a stockist

WHERE TO USE

Decking, timber walkways, outdoor furniture, pergolas, steps, rails, fences, gates and all other exterior timber.

COVERAGE RATE

8m² per Litre

NUMBER OF COATS

Bare Timber: 2

Maintenance: 1

RECOAT TIME

Recoat after 4 hours

DRY TIME

Light foot traffic -12 hours.

Full curing 7 days.

CLEAN UP

Water Washup

HOW TO PREPARE YOUR DECK

Proper preparation is key to achieving the best finish!

To get the most out of your deck, we recommend using Feast Watson’s Woodclean first to remove any dirt, oils or other contaminants to ensure you achieve the best result.

New Timber

How to prepare New Timber...

To coat your new timber immediately, use Intergrain® UltraPrep Tannin and Oil Remover, followed by Feast Watson Woodclean™. This way you will get the absolute best result from the Matt Look Deck Oil.
Alternatively, allow your new timber to weather for 4 - 6 weeks before applying. If you have a rich coloured timber hose it down recularly to release the tannin from the timber.
If you have pine decking, leave this to weather for 2 weeks before you coat with oil.

Weathered Timber

How to prepare Weathered Timber...

Make sure to clean your deck with Woodclean to ensure a blank canvas for your new masterpiece. No dirt or mould is welcome here!
If you have any stains or deteriorated surfaces, we recommend sanding the surfaces.
Don’t forget to get rid of all sanding residue before starting with Matt Look Deck Oil!

How to apply Matt Look Decking Oil to your deck:

So, how do you make your deck look industry standard? Let’s see!

Before you get started, you need to ensure the following:

Your timber is completely dry before applying the Matt Look Deck Oil.
The Matt Look Deck Oil is thoroughly stirred through before starting (and during!). Avoid introducing any bubbles!
If you are coating a large space and need more than one Deck Oil, mix both cans together in a large container.
Make sure you only use the best tools such as a quality synthetic, pure bristle brush or lambswool applicator. Please don’t use a roller! We only want the best for your deck.

Alright take your product and your brush and let’s apply your timber oil:

Apply your first coat of Matt Look Deck by walking along 3-4 planks at a time, in the same direction as the grain of the deck.
Don’t forget about your edges! They need to be fully coated.
Note: You don’t have to be cautious about how much to use – the more the merrier!
Leave your deck to dry for 4 hours. Go make yourself a cup of tea, put your feet up and read a book.
Once you have finished a few chapters, apply a second coat as above.
Leave to dry for another 12 hours.
Congratulations, you now have a beautiful deck!

Note: If your deck is in full sun exposure, around pools or in humid areas, apply a third coat.

What is the drying time for the Matt Look Deck Oil?

Just like any other painting adventure, you must allow enough drying time. Make sure you allow for the following time:

Touch Dry: 2 hours.
Recoat: Allow a minimum of 4 hours drying between coats.
You can walk on your beautiful deck after 12 hours; however full curing occurs after 7 days.

How do I maintain my deck after using the Matt Look Deck Oil?

You’ve finished! Well done. Now, how do you keep your deck looking it’s best?

Regular check on the coated timber to look for any colour loss, dryness or weathering. If this occurs, recoat the timber and it will return to its original beauty.
If you recoat, don’t forget to clean your deck first using Woodclean!

Woodclean

A powerful oxalic acid based clearner to remove oil, mould, stains and tannins from outdoor timber.

PREPARATION